sebelum nya buat om momod and om mimin mohon maaf kalo salah tempat..
ane sebenernya ada yang bingung dan ganjel di fedora,,
sebenernya minimum requirement hardware di fedora berapa si?
spek komputer ane kalo buat di win**s mah agak lumayan cepet..
Processor AMD sempron 2400+
RAM 512 MB
HDD 80 GB
Geforce FX 5200 128MB
dan ane kutip di situs resmi fedora minimum nya segini
1.2.2. Processor and memory requirements for x86 Architectures
The following CPU specifications are stated in terms of Intel processors. Other processors, such as those from AMD, Cyrix, and VIA that are compatible with and equivalent to the following Intel processors, may also be used with Fedora. Fedora 11 requires an Intel Pentium or better processor, and is optimized for Pentium 4 and later processors.
*
Recommended for text-mode: 200 MHz Pentium-class or better
*
Recommended for graphical: 400 MHz Pentium II or better
*
Minimum RAM for text-mode: 128MiB
*
Minimum RAM for graphical: 192MiB
*
Recommended RAM for graphical: 256MiB
tapi kenapa pas baru aja startup tinggi banget y memory usagenya??kira2 sampe 400Mb an..
kalo ditambah browsing pake firefox kepakenya cukup gede..kira2 seginian :
total used free shared buffers cached
[ikkinaii@localhost ~]$ free -m
total used free shared buffers cached
Mem: 498 465 33 0 18 137
-/+ buffers/cache: 308 189
Swap: 1023 0 1023
[root@localhost ~]# /sbin/service --status-all
acpid (pid 1097) is running...
atd is stopped
auditd (pid 1042) is running...
Avahi daemon is not running
bluetoothd is stopped
btseed is stopped
bttrack is stopped
cpuspeed is stopped
crond (pid 1276) is running...
cupsd (pid 1080) is running...
cups-config-daemon is obsolete
dc_client is stopped
dc_server is stopped
dnsmasq is stopped
Usage: /etc/init.d/firstboot {start|stop}
hald (pid 1105) is running...
httpd is stopped
ip6tables: Firewall is not running.
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0
3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
5 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
irattach is stopped
irqbalance is stopped
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
mdmonitor is stopped
dbus-daemon (pid 1546 1070) is running...
multipathd is stopped
mysqld is stopped
netconsole module not loaded
netplugd is stopped
Configured devices:
lo eth0
Currently active devices:
lo eth0
NetworkManager (pid 1250) is running...
rpc.mountd is stopped
nfsd is stopped
rpc.rquotad is stopped
rpc.statd is stopped
nmbd is stopped
nscd is stopped
ntpd is stopped
nvidia.ko for kernel 2.6.30.10-105.2.4.fc11.i686.PAE was found.
The driver is enabled.
pcscd is stopped
portreserve is stopped
Process accounting is disabled.
rdisc is stopped
restorecond is stopped
rpcbind is stopped
rpc.idmapd is stopped
rsyslogd is stopped
saslauthd is stopped
sendmail is stopped
sm-client is stopped
smartd is stopped
smbd is stopped
Monthly smolt check-in is disabled.
snmpd is stopped
snmptrapd is stopped
squid is stopped
openssh-daemon (pid 1265) is running...
winbindd is stopped
Wine binary format handlers are registered.
wpa_supplicant (pid 1260) is running...
ypbind is stopped
zvbid is stopped
padahal ane dah coba tweak service yang gak diperluin sepeti yang dianjurin sama mbah mauriat di
http://www.mjmwired.net/resources/mjm-services-f11.htmldi fedora 11 tapi masih aja tetep hasilnya rakus memory..
kira2 ada yang tau penyebabnya?apa emang si fedora ini makan banyak memory??soalnya kjomputer ane jadi lambat banget kalo jalanin beberapa aplikasi dan suka kehabisan memory..
padahal waktu make wind**s gak segini rakus nya sama memory,,
mohon pencerahannya,,
salam,
